 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC25005/W THRU GBPC2510/W FEATURES * * * * * * * VOLTAGE RANGE CURRENT 50 to 1000 Volts 25.0 Ampere GBPC35 1.135(28.8) 1.115(28.3) 0.72(17.1) .632(16.1) AC GBPC35W 1.135(28.8) 1.115(28.3) .470(11.0) .430(10.9) AC Plastic package has UL flammability classification 94V-0 Integrally molded heatsink provides very low thermal resistance for maximum heat dissipation High forward surge capacity Glass passivated chip junction High isolation voltage from case to lugs High temperature soldering guaranteed: 260/10 seconds, A vailable in either lug package (GBPC25005) or wire lead package (GBPC25005W) + 1.135(28.8) 1.115(28.3) .672(17.1) .632(16.1) .582(14.8) .542(13.8) 1.135(28.8) 1.115(28.3) AC AC + .732(18.6) .592(17.6) - .732(18.6) .692(17.6) .732(18.6) .692(17.6) 0.094(2.4)DIA. .042(1.07) 0.034(.86) 0.030(.76) .25(6.35) .038(.97) 1.25 (31.8) MIN. .840(21.3) .310(7.87) .290(7.36) .220(5.59) .220(5.59) .100(5.08) HOLE FOR #10 SCREW METAL HEAT SINK 0.200(5.08) HOLE FOR #10 SCREW METAL HEAT SINK .740(18.8) 0.310(7.87) 0.290(7.36) MECHANICAL DATA * * * * * Case:Epoxy, Molded Plastic with integrally mounted heatsink Terminals: Plated 0.25"(6.35mm) lug or plated 0.040" (1.02mm) diameter lead Polarity: Polarity symbols market on case Mounting: Thru hole for #10 screw, 20 in-lbs Torque max. See Note 3 Weight: 0.53 ounce, 15.0 gram-GBPC35 and GBPC35-W Ratings at 25 ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS GBPC GBPC 25005/W Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS * * * GBPC 2502/W GBPC 2504/W GBPC 2506/W GBPC 2508/W GBPC 2510/W 2501/W UNIT Volts Volts Volts Amps Amps A2s Volts A nS pF /W Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current (SEE FIG.1) at TC=55 Peak Forward Surge Current 8.3mS single half sine wave superimposed on rated load (JEDEC method) Rating for Fusing (t8.3ms) Maximum Instantaneous Forward Voltage drop Per Bridge element 12.5A TA = 25 Maximum DC Reverse Current at rated DC blocking Voltage per element T = 125 A Isolation Voltage from case to lug or lead Typical Junction Capacitance per leg (NOTE 1) Typical Thermal Resistance per leg (NOTE 2) Operating Junction Temperature Storage Temperature Range VRRM VRMS VDC I(AV) IFSM I2 t VF IR VISO Cj RJC TJ TSTG 50 35 50 100 70 100 200 140 200 400 280 400 25 300 375 1.1 5.0 500 2500 300 1.9 (-55 to +150) (-55 to +150) 600 420 600 800 560 800 1000 700 1000 Notes: 1. 2. 3. Measured at 1.0MHz and applied reverse voltage of 4.0V Thermal resistance from junction to case per leg Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw. E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC25005/W THRU GBPC2510/W VOLTAGE RANGE CURRENT 50 to 1000 Volts 25.0 Ampere FIG. 5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT (A) 100 FIG. 6 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG T J =125 T J =150 INSTANTANEOUS REVERSE LEAKAGE CURRENT(A) 100 10 TJ =25 PULSE WIDTH=300s 1% DUTY CYCLE 10 1 1 50-400V 600-1000V 0.1 0.1 TJ =25 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 7 - TYPICAL JUNCTION CAPACITANCE PER LEG FIG .8 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 600 1000 TRANSIENT THERMAL IMPEDANCE, (/W) TJ =25 f=1.0 MHz Vsig=50mVp-p TJ =25 f=1.0 MHz Vsig=50mVp-p JUNCTION CAPACITANCE, (pF) 100 10 100 50 1 1 10 100 0.01 0.1 1 10 100 REVERSE VOLTAGE,(V) t, HEATING TIME, sec. E-mail: sales@cnmic.com Web Site: www.cnmic.com GLASS PASSIVATED SINGLE-OHASE BPIDGE RECTIFIER GBPC25005/W THRU GBPC2510/W VOLTAGE RANGE CURRENT 50 to 1000 Volts 25.0 Ampere FIG. 5- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FORWARD CURRENT (A) 100 FIG. 6 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS PER LEG T J =125 T J =150 INSTANTANEOUS REVERSE LEAKAGE CURRENT(A) 100 10 TJ =25 PULSE WIDTH=300s 1% DUTY CYCLE 10 1 1 50-400V 600-1000V 0.1 0.1 TJ =25 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, (V) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 7 - TYPICAL JUNCTION CAPACITANCE PER LEG FIG .8 - TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 600 1000 TRANSIENT THERMAL IMPEDANCE, (/W) TJ =25 f=1.0 MHz Vsig=50mVp-p TJ =25 f=1.0 MHz Vsig=50mVp-p JUNCTION CAPACITANCE, (pF) 100 10 100 50 1 1 10 100 0.01 0.1 1 10 100 REVERSE VOLTAGE,(V) t, HEATING TIME, sec. E-mail: sales@cnmic.com Web Site: www.cnmic.com |
Price & Availability of GBPC25005-W
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |